It becomes important to fix the boot loop problem because only then can you use your smartphone.

The OnePlus 9/9R/9 Pro are some of the best-selling smartphones on the market, and they come with a lot of features that make them great options for users. One of the most common problems that users experience is the boot loop problem, which can prevent them from starting their smartphones. This problem can be fixed by following some simple steps, and I will show you how to do this in this article.

Why Does This Happen?

Some people believe that a smartphone might get stuck on the boot logo because of a corrupted or faulty firmware. Others say that it could be caused by a bad battery, or by an issue with the phone’s hardware. However, there is one sure way to fix this problem and that is to perform a factory reset. ..

The systems files which are necessary to perform all the system processes have a hard time in functioning during the initial startup. ..

There are a number of reasons why your phone might not be working properly. Some of these can be due to downloading a faulty app, playing with system files, or even a hardware issue. ..

OnePlus has been known for its fast response times on its devices, but some users have been experiencing slow response times on their OnePlus 9/9R/9 Pro. There are a few things that you can do to fix this issue. ..

Fix The Boot Loop Problem on OnePlus 9/9R/9 Pro

By Doing a Forced Restart

If you’re having trouble with your device, restarting it is often the best solution. ..

To fix the boot loop problem on the OnePlus 9/9R/9 Pro, you must force a reboot.

To restart your smartphone, press and hold the Power button and Volume Up button at the same time. After holding these buttons for about 15 seconds, your device should vibrate and then restart. If your phone does not start automatically, you can press the Power button for about 2 seconds to start it. ..

By Waiting for the Battery to Exhaust

One way to try and fix the bootloop issue on OnePlus 9/9R/9 Pro is to wait for the battery to run out completely and then restart the phone. ..

If the smartphone has a battery with a low charge, it could take a few hours to a few days for the battery to be fully charged. ..

If your phone dies after a few hours of use, it’s likely that the battery is exhausted. To avoid this from happening, try to wait for a minute after it turns off and then charge it.

We recommend using the stock charging accessories that came with your phone. Once it is charged completely, try restarting it.

  1. Open the OnePlus app on your phone.
  2. Scroll down to the bottom and tap on “System.”
  3. Scroll down to the bottom and tap on “Battery.”
  4. Tap on " recalibrate."

If you have a smartphone that runs out of battery power, you can try to recharge it by using the original charging accessories that come with it. Just leave it on charge for an hour or so after it charges to 100%. And also, make sure that you don’t use your smartphone while charging. After an hour or two of complete charging, remove your device from the charging and then restart it. Then again use your smartphone till you drain the battery completely. And repeat the steps above.

By Booting into Recovery

If you have been having problems with the OnePlus 9/9R/9 Pro booting up, and you have tried various solutions, including resetting your device, cleaning it, and even changing the battery, then this is the final step that you can try to fix the problem.

  1. Press and hold the power button for about 10 seconds.
  2. Hold down the volume up button for about 10 seconds.
  3. Turn off your device by pressing and holding the power button and volume up button at the same time.

To turn off your OnePlus 9/9R/9 Pro:

  1. Press and hold the Power button+Volume Down button together and you will see the recovery mode options.
  2. Once you see the Recovery options, you can take your hands off the buttons.
  3. You will now see the recovery menu.

Wiping Cache From Recovery

  1. Press and hold the power button until the Apple logo appears.
  2. While holding down the power button, press and hold the “volume up” key until the “bootloader” screen appears.
  3. Press the “volume down” key to get to the “recovery mode” screen.
  4. Press and hold the “power” button until you see a message that says “wipe cache partition.”
  5. Release the power button and press it again to confirm your choice. ..

From the recovery menu, use the Volume buttons to navigate to ‘Wipe Cache Partition’. Use the Power button to confirm your selection. ..

Performing Factory Reset

  1. Boot your OnePlus 9/9R/9 Pro into fastboot mode.
  2. Type in the following command: fastboot erase alldata
  3. Reboot your OnePlus 9/9R/9 Pro.
  4. Type in the following command: fastboot flash recovery recovery-8.0.0-20181020-signed

From the recovery menu, use the Volume buttons to navigate to ‘Wipe data/factory reset’. Confirm your selection by pressing the Power button. ..

Conclusion

The main point of this article is that if you have a boot loop problem on your OnePlus 9/9R/9 Pro, there are some methods you can use to fix it. If these methods do not help, we suggest that you visit a nearby OnePlus Customer Support Center where an expert can take a look at your device and fix it for you.

If you’re having Bluetooth issues with your OnePlus 9/9R/9 Pro, here are some tips to help fix them.